Jump to main content Jump to doc navigation

Contributors around the world are always creating new pull requests with bug fixes, new features, and other improvements.

The responsibility to accept and merge those falls on a rather small team of volunteer Core Integrators, and it can sometimes take some time for those to properly test and approve changes.

Luckily, you can help with that!

By testing pull requests and reporting your feedback, you help provide integrators the confidence needed to accept a change. Or you might just find an issue with the proposal that the contributor needs to fix, first, which is equally helpful.

This guide explains how you can help testing pull requests. It's helpful to also checkout the contributors guide, which explains the process a contributor goes through to create the pull request.

1. Find an open pull request

Browse the list of pull requests on GitHub to find something you'd like to test. It's useful to pick something that matches your own skills, but not required.

Almost all pull requests will be tagged with a pr-state. It's most useful to focus on those tagged pr-state/review-needed, as those have not yet been formally reviewed.

2. Read - what is it about?

Before diving into the code, try to familiarise yourself with the problem it tries to fix. Read the pull request description and the linked issues. Decide if it's something you can test, or move on to another pull request.

Especially for bug fixes, try to reproduce the problem in the relevant release branch before testing the change. This makes sure it's clear how to reproduce and to confirm that the pull request actually does fix the problem.

(More information about the different release branches can be found in the contributors guide.)

If you can't seem to reproduce a bug based on the provided information, ask in either the original issue or the pull request how you can help test it.

During realtime events such as bug hunts, it's useful (and sometimes necessary to score points) to comment on the pull request to "claim" it and score points, but that's not needed if you're just doing your good deed for the day.

3. Run the pull request locally

In order to test the pull request, you will need to patch a local development site of MODX with the proposed changes.

The simplest way to do that is using the GitHub CLI "gh". In your local development site, run the command gh pr checkout <id of pull request>, e.g. gh pr checkout 12345. That will instantly load the code from the pull request.

The checkout command does not automatically rebase or merge the changes, so you'll need to do that in order to spot conflicts with recent changes:

git rebase upstream/2.x

Replace 2.x with the relevant base branch.

Alternative without GitHub CLI: PR branches

Using a text editor or the terminal, edit the .git/config file in your repository. For example use nano .git/config from the root of your local copy of MODX.

Find the [remote "upstream"] section (or [remote "origin"] if you don't have a separate upstream remote). It should look like this:

[remote "upstream"]
        url = [email protected]:modxcms/revolution.git
        fetch = +refs/heads/*:refs/remotes/upstream/*

Add one more line to the fetch; note the indentation.

[remote "upstream"]
        url = [email protected]:modxcms/revolution.git
        fetch = +refs/heads/*:refs/remotes/upstream/*
        fetch = +refs/pull/*/head:refs/remotes/upstream/pr/*

(If you don't have an upstream remote, replace it with origin.)

Now when you do git fetch upstream or git pull upstream, you'll get special branches for each pull request.

$ git fetch upstream
remote: Enumerating objects: 279, done.
remote: Counting objects: 100% (279/279), done.
remote: Total 355 (delta 278), reused 279 (delta 278), pack-reused 76
Receiving objects: 100% (355/355), 74.90 KiB | 6.81 MiB/s, done.
Resolving deltas: 100% (285/285), completed with 181 local objects.
From github.com:modxcms/revolution
   ab0da3bcf..73a5a8df3  2.x                  -> upstream/2.x
   dc184c801..bea16ac43  3.x                  -> upstream/3.x
   a4e22026b..558369bc5  refs/pull/14860/head -> upstream/pr/14860
 * [new ref]             refs/pull/14888/head -> upstream/pr/14888
 * [new ref]             refs/pull/14889/head -> upstream/pr/14889
 * [new ref]             refs/pull/14890/head -> upstream/pr/14890
...

The first time you run this, it will include what's called a "ref" for every pull request ever created. That's a long list, and may take a minute, but it'll only fetch changes the next time you run it.

With the special branches in place, you can now checkout or merge them directly with Git.

In the commands below, replace name-of-branch with either the name of the pull request branch as created by the pull request author (shown at the top of the pull request view), or the special upstream/pr/<id-of-pr> ref if you've used the trick to fetch pull requests.

The benefit of using git checkout is that you're loading a specific version that already exists, so it's easier. You can checkout with:

git checkout name-of-branch

The downside of checking out is that any changes made to the official base branches since the contributor started on their change will be discarded.

This means the code may be different when merged compared to the proposal, which is why merging would be preferred when testing.

The downside: you may run into merge conflicts and need to take extra care not to actually commit the changes.

To merge a pull request locally, execute:

git merge --no-ff --no-commit name-of-branch

Ideally, you'll see the merge went well ("Automatic merge went well; stopped before committing as requested "), but it is possible to run into errors at this stage.

  • If you see the message error: Your local changes to the following files would be overwritten by merge:, you have local, uncommitted, changes. You can stash any changes you want to keep, or do a hard reset to discard all changes with git reset --hard upstream/2.x (replace 2.x with the version branch you're using) and/or git checkout -- . - then run the merge command again.
  • If the message reports merge conflicts, git tried to apply the changes from the pull request, but failed to determine how conflicting changes should be applied. The message should point you to the specific files; in there you'll find blocks of duplicated code that you'll need to manually correct.

At this point, you're running the proposed change. Yay!

4. Running build steps and refreshing caches

Depending on the pull request and what it changed, you may need to do one (or more) of the following before you can test:

5. Testing pull requests

Now look back at the pull request and issues to determine how to best test the changes.

For bug fixes you'll want to try reproducing the bug before doing the merge and then again after the merge, which hopefully wont work because it's fixed. For new features you'll want to make sure it works as described by the pull request author.

It's also fun to try to break a change. Is there a way you can manipulate the change so that it no longer does what it should? What happens when you provide invalid values? That type of testing can point to potential security issues or new bugs, and are best to catch early.

If you're comfortable with the programming language used in the change (typically PHP, JavaScript, or Sass/CSS), you can also do a code review.

How much and what type of testing you can do will depend on your skills. If you're a hardcore hacker you may be better at testing for security issues, while others may be better suited to comment on design changes. All skillsets are useful.

6. Report your findings

All of the above is pointless if you don't share your results with the community, so now it's time to share!

  • Is a bug not fixed yet?
  • Should something be done differently? (Don't forget to explain why.)
  • Or is it working exactly as advertised?

Reply to the pull request with what you found.

7. Cleanup your local installation

When you're done with testing, you'll want to restore your local MODX installation to the official version branch.

  • If you used the git checkout approach, you can simply checkout the version branch again with git checkout 2.x - if you had to run any build steps, you may need to revert those changes with git reset --hard name-of-branch before you can checkout.
  • If you used the git merge approach, you can cancel the merge and revert any build steps using git reset --hard upstream/2.x

Need help?

If you're trying to test a pull request but get stuck, don't forget to ask for help. Your testing is very valuable, and if we can get you up and running that will be better for everyone.

Get help in the MODX Community Slack #development or on the MODX Community Forums.

Support the team building MODX with a monthly donation.

The budget raised through OpenCollective is transparent, including payouts, and any contributor can apply to be paid for their work on MODX.

Backers

  • modmore
  • STERC
  • Jens Wittmann – Gestaltung & Entwicklung
  • Fabian Christen
  • Digital Penguin
  • Dannevang Digital
  • Sepia River Studios
  • CrewMark
  • Chris Fickling
  • deJaya
  • Following Sea
  • Anton Tarasov
  • eydolan
  • Raffy
  • Lefthandmedia
  • Murray Wood
  • Snow Creative
  • Nick Clark
  • Helen
  • JT Skaggs
  • krisznet
  • YJ
  • Yanni
  • Richard

Budget

$366 per month—let's make that $500!

Learn more